E-mail: hzjesse@gmail.com
Tel: +86-571-83867628
Home > News > Content

News

What Are The Advantages Of Roof Tiles?

Jun 02, 2018

The roof tile is much more important than a person's coat. Coat wearing inappropriate not beautiful, can change a, immediately, otherwise, as building materials, such as inappropriate, talk easy, you want to change both money and work, building the "appearance" is a wear for decades. The following points should be noted to make the roof tile beautiful.

1. Roof tiles have precise dimensions, close joints and small paving errors. A good roof tile, laid in a straight line, as neat and beautiful as a print. The size error is large or there is warping, often can not be laid. If the tile model is made of iron sheet, it can not produce the tiles with accurate size. No one can lay a tile like this. For example, the width of tiles is only 2mm, and 100 tiles will be arranged, which will be 20 cm apart, wider than half tiles. The tiles will naturally become inclined and cannot be spread. If tile warps, spread after the gap is big, also won't be beautiful.

2. Roof tiles are of durable color, which can be exposed to the sun by wind and rain without fading. A few small color tile factory because equipment is simple, technology does not pass a level, cannot spray cement color slurry even and consistent, and use paint to spray color. In a very short time the paint will fall off and the bottom will be exposed.

3. Roof tiles have good frost resistance. In the north, winter temperatures fall to minus 10 ℃ below is often the case. If the density of the tile is not good enough, the water absorption rate is high. If the snow water is absorbed during the day, ice at night will expand and crack the colored layer, causing it to peel off slowly and damage the tile. The tile of small factory because did not pass high pressure rolling, compactness is bad, the service life of tile won't be long. In addition, the lower the thermal conductivity of the tiles, the warmer the building.

4. Roofing tile heat insulation performance is good, for example in the hot season, with no heat insulation roofing tile building will feel the heat, simply stop the heat outside, especially for workshop roof, such work environment will greatly affect the enthusiasm of the workers and endurance, resulting in decreased productivity.

5. Roof tiles are of durable color, which can be exposed to the sun by wind and rain without fading. A few small factories because equipment is simple, technology does not pass a level, cannot spray cement color slurry evenly consistent, and use paint to spray color. In a very short time the paint will fall off and the bottom will be exposed.

6. There is no color difference between roof tiles and tiles. After going into the house, each tile is uniform in color, no depth, no spots.

7. Roof tile - shaped slope gentle, giving people a sense of beauty. The tile form of big factory is designed meticulously by the expert from the artistic Angle, shop on the roof can give a person beautiful and friendly feeling. Small factory tile did not pass this kind of percussive design, tile shop on the house to give a person with mechanical blunt sense, look very uncomfortable.