Concrete Roof Tile Forming Machine

Concrete roof tile forming machine

Work flow: lifting --- mixing --- quantitative filling --- pressure forming --- demoulding --- molding tiles ----placed on the tile shelf --- --- stacking --- curing Hours) --- polishing --- finished products.

1. First, put the ingredients in the bucket elevator and then transfer them to the rolling mixer, at which point you have to add some water to it.

2. After mixing, the mixture enters the dosing machine, and then the measurable mixture required for a tile will be placed through a small hole into the lower mold.

3. Then, the tiles can be formed by high pressure with a pressure of about 125 tons. The tiles produced are therefore very stable and dense. I think builders can walk boldly on paved roofs.

4. By the way, tiles need to be dried for about 10 days before they can be painted.

Mix water, cement, stone powder, marble particles, sand and other raw materials in proportion, and then feed the mixture evenly into the host machine of the cement terrazzo brick making machine, and then add it to the mold under hydraulic cylinder and high pressure to produce the semi-finished terrazzo The tiles become cement terrazzo tiles after maintenance and painting. If different molds are used, such as roof tile molds, roof tiles can be obtained.

Hot Tags: concrete roof tile forming machine, China, manufacturers, suppliers, factory, cheap, low price, price