The necessary operating specifications for the efficient and stable production of cement color tile machine
As a special equipment for the production of cement colored tiles, the cement colored tile machine must achieve stable and efficient production of qualified colored tile products. In addition to the quality and performance of the machine itself, the correct and standardized operation is also a necessary condition to ensure the long-term high efficiency and stable production of the colored tile machine. Standardized operation and use can not only extend the service life of the equipment, but also reduce the occurrence of machine failures and the manpower and material consumption in maintenance.
1. Before starting the automatic cement tile machine, check whether the equipment and electrical appliances are in good condition, and cut off the power when off work.
2. When the fully automatic cement tile machine is in operation, no shovel or other objects shall be inserted into the mixer.
3. Ensure that the mixing time of each automatic cement tile machine is not less than 120 seconds.
Four, the operator should pay attention to the safety of the operating environment. Such as the hopper, the position of the discharge port, etc.
5. Non-operators are not allowed to operate casually.
6. Adjust the amount of water added to each machine according to the moisture content of the yellow sand to make the mixture damp and suitable.
7. If the operator needs to enter the mixer for inspection, he must cut off the power supply and set up a special person to supervise it.
8. Make a record of mixing according to the notice of mixing ratio.
Nine, the operator should carefully fill in the on-duty operation record.
10. After the shift, clean up the excess material in the equipment and conveyor belt of the automatic cement tile machine in time and wash it out to keep the surroundings clean and hygienic.
