Use and maintenance of cement tile machine
1. Filter
1. Every time the oil is changed, the filter should be replaced or thoroughly cleaned;
2. The air filter on the fuel tank should be checked and cleaned every 3 months, preferably every 1 year.
3. The machine tool has related alarms or the oil quality is not clean and other filters are abnormal and should be replaced;
2. Hydraulic components
1. Clean hydraulic components (substrates, valves, motors, pumps, oil pipes, etc.) every month to prevent dirt from entering the system, and do not use detergents;
2. After using the new machine for one month, check whether the bending of each oil pipe is deformed. If there is any abnormality, it should be replaced. After two months of use, all accessories should be tightened.
At the connection, it should be turned off when this work is performed, and the system has no pressure.
3. Hydraulic oil circuit
1. Check the oil level of the fuel tank every week. If the hydraulic system is repaired, it should also be checked. The oil level should be filled with hydraulic oil if the oil level is lower than the oil window;
2. The oil temperature of the system should be between 35°C and 60°C, and should not exceed 70°C. If it is too high, the oil quality and accessories will be deteriorated and damaged.
3. The hydraulic oil used in this machine is ISOHM46 or MOBILDTE25;
4. The oil should be changed after the new machine works for 2000 hours, the oil should be changed after every 4000 to 6000 hours of operation, and the oil tank should be cleaned every time the oil is changed.





